How To Install Skylight Covers

You want to install skylight covers for your home since it gets a bit too hot during summer. There are a few cautions and procedures you need to follow.

It is really easy to install anything provided you know what are the things that you need and of course how to do it. When you want to install something, make sure you take the proper precautions. Do not take things for granted. It is best to read about it and do a bit of research as well. Optionally you could get a friend who has done it before to help you out.

To install a skylight cover, you will need a measuring tape, a drill, a ladder, screws, a screwdriver, and of course, a skylight cover.

There are many materials that you can choose from. You have polycarbonate, blinds, and pyramid-shaped or round-shaped cover. Decide which type you want to install. You should also consider the amount of light you want to block out. If you would just like to block the heat out but maintain some light, you should go for the polycarbonate. It is light and allows for some light in the room. Another plus point is that it manages to keep the heat out.

Now you need your ladder to get to your roof. Make sure you feel comfortable with it, and your ladder has to be stable. If you have a ladder, just borrow it from a friend or neighbor.

Remember, SAFETY FIRST! Once you are up on the roof, use your measuring tape to measure the length and width of your skylight. Now, if you find it difficult to do it alone, just get a friend to help you. You could get them to hold the tape to get your measurement.

Now to install your skylight covers, make sure the covers are an inch or so longer and wider than the length and width of your skylight. This will ensure that you can tightly shut the covers with your drill and screw. Do not get a too-tight fit, or it would be difficult for you to remove the covers when you feel like doing so.

Now comes the drilling. Make sure you do not drill too deep in. The screw that you use has to be strong enough to hold your covers. You need to choose appropriately. Now drill the holes 1 to 2 inches apart. You will have to drill the holes all around the covers. This way, your covers will stay on tightly. Now, if you are using blinds as your covers, remember that you will have to read the instructions. Installation of the skylight blinds depends on the type of blinds you have picked. So read the instructions. Make sure you make it a point to clean the covers ever so often.

Source: Best Roofing Contractors Near Me. Compare the best roofing contractors in your area.